Electric temperature control valve actuator

The electric actuator consists of a temperature controller, a valve actuator, and a valve. The thermostat is installed on the walls of the room and connected to the electric actuator using cables. Generally, a 100cm long cable is used to connect the actuator to the selected control point (thermostat, programmer, timer, or other remote device). The actuator is connected to the valve with a nut. When the indoor temperature reaches the temperature set by the temperature controller, the positive thermistor inside the electric actuator starts working, and the heating thermal expansion device closes the valve. Conversely, when the indoor temperature decreases, the temperature controller disconnects, the actuator cools down, the expansion device contracts, and the valve opens. Both imported and domestic brands generally have automatic reset function when power is cut off.

Ordering Instructions

Name and model of regulating valve

Nominal pressure Mpa

Nominal diameter (mm)

Rated flow coefficient (Kv)

Inherent flow characteristics

medium name

Working temperature and range

Operation mode of the whole machine

Pressure set point and adjustment range

Valve body, valve internals, and packing materials

Attached attachments

Other special requirements