Pneumatic O-type cut-off ball valve with feedback

Composed of pneumatic O-type cut-off ball valve and pneumatic double acting actuator. It has the advantages of simple structure, small size, light weight, and easy operation, and can be widely used in automatic adjustment and remote control of industrial production processes such as petroleum, chemical, hydropower, and textile.

The O-shaped ball valve consists of valve body, ball body, valve shaft, sealing ring, packing, pressure plate and other components.

The actuator is composed of main components such as gas, piston, gear type, output shaft, cylinder head, bearing, guide ring, piston bearing, adjusting bolt, "O" ring, etc.

The actuator is connected to the valve using a connecting shaft. After the input of air pressure into the cylinder, a certain amount of thrust is generated on the piston, causing the gear type output to rotate under the push of the piston, driving the gear output shaft to rotate and drive the valve shaft to rotate, thereby causing the ball valve ball to rotate inside the valve, changing the flow area of the valve and achieving the purpose of changing the flow rate of the medium passing through the valve.

Nominal diameter DN15-DN300

Rated flow coefficient Kv 20-8500

Dual action mode of action; Single action; Pneumatic opening (K); Airtight type (B)

Nominal pressure PN (Mpa) 1.6-6.4

The turning range is 0~90.

Inherent flow characteristics, fast opening

Working temperature t (¡æ) -20~160

Gas source pressure Ps (Mpa) 0.3~0.6

Flange size, type PN10, 16, 40GB9113-88, PN64JB/T79-94, PN10, 16 convex PN40, 64 concave or other standard types of flanges (such as ANSI, JIS, DIN, etc.) can be selected according to user requirements

1. Product model

2. Nominal diameter (DN)

3. Nominal pressure (PN)

4. Rated flow coefficient KV

5. Materials for valve body and internal components

6. Fixed flow characteristics

7. Applicable temperature and medium

8. Operation mode of the whole machine (electric on/off) and input signal

9. Accessories (operator, servo amplifier, etc.)

10. Special requirements